Search found 23 matches

by Albinatum
Mon Jan 25, 2021 12:46 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: A026 USB connection to PC----solved
Replies: 3
Views: 1382

Re: A026 USB connection to PC

Have managed to work with your advice. Also I'm really happy because my tablet surface Pro X with windows 10 ARM64, has recognized the usb connection of device straight away and also running wit it. Because it's a real pain the drivers for such version that must be compiled exclusively for ARM64 (wi...
by Albinatum
Mon Jan 25, 2021 12:04 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: A026 USB connection to PC----solved
Replies: 3
Views: 1382

Re: A026 USB connection to PC

connections with A026
by Albinatum
Mon Jan 25, 2021 11:57 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: A026 USB connection to PC----solved
Replies: 3
Views: 1382

A026 USB connection to PC----solved

Received my Brand new QK-A026 and connected via USB (also power input) and wi-fi setup too, no problem. I received today Digital Yacht USB to NMEA adaptor as per two instructions attached, in order to get USB NMEA data connection to computer and using the USB connection of device for power supply on...
by Albinatum
Mon Sep 07, 2020 5:08 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Cannot get A031 to work---solved(also discussed NASA masthead clipper issue)
Replies: 30
Views: 18991

Re: Cannot get A031 to work---solved(also discussed NASA masthead clipper issue)

I have finally get my NASA GPS sensor work without the protocol bridge. Hopefully, this image helps other people who have single end NMEA devices.
by Albinatum
Thu Aug 06, 2020 10:01 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: A033 to Garmin echomap 75,do I need a Quark protocol bridge?-----solved
Replies: 1
Views: 1009

A033 to Garmin echomap 75,do I need a Quark protocol bridge?-----solved

Got the A033 yesterday and it works well with my digital yacht AIT1500 after swapping two NMEA wires. AIS messages shown on my tablet via WiFi.
Now, i want to connect A033 nmea output to Garmin chart plotter.How can I do since there is only one RX on Garmin chart plotter.
by Albinatum
Sat Jul 25, 2020 11:17 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Navionics on iPad
Replies: 6
Views: 4067

Re: Navionics on iPad

Always use static IP address on Apple devices is a good way to keep WiFi connection reliable.
by Albinatum
Tue Jul 21, 2020 1:53 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Navionics & Boat Beacon on Android 4x / AO24
Replies: 8
Views: 3668

Re: Navionics & Boat Beacon on Android 4x / AO24

If there is no enough AIS targets nearby you could see disconnection issue on Navionics. To check the real WiFi connection you can try to download 'UDP / TCP / Rest Network Test Utility' from Apple store and then monitor the real WiFi connection. For Ipad, you probably, need use 'Network Utility Too...
by Albinatum
Fri Jul 17, 2020 4:43 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Navionics & Boat Beacon on Android 4x / AO24
Replies: 8
Views: 3668

Re: Navionics & Boat Beacon on Android 4x / AO24

i have similar problem. it was solved by changed the IP address to be static and make sure DNS and router both should be the 192.168.1.100 which was shown on A026. The other point you should know is Navionics will show ''disconnected'' if no AIS messages been received within 10 seconds, actually it ...
by Albinatum
Wed Jun 24, 2020 4:19 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: A206 with Lowrance Hook 4
Replies: 3
Views: 1407

Re: A206 with Lowrance Hook 4

Worthy to try ground(Shield) and one of the TX to A026?