Search found 20 matches

by PedroFed
Sun May 10, 2020 3:45 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: A032 not communicating with ICOM M330 VHF
Replies: 5
Views: 4595

Re: A032 not communicating with ICOM M330 VHF

Tim, did you see 0183 LED blinked? Quark explained to me that the LED blinks when valid N2K data were converted to 0183 port. So you need see this Led blinking even not connect with ICOM M330. If the data were converted properly and output to 0183 port(0183 LED blinks), I believe you need the GND an...
by PedroFed
Thu Mar 12, 2020 10:15 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: QK-A031 & Watcheye AIS receiver,ST50, Navtex connections----solved
Replies: 7
Views: 3486

Re: QK-A031 & Watcheye AIS receiver,ST50, Navtex connections

I changed the output back to 38.000. Now I do not have GPS or Seatalk data in my Navtex anymore. But OpenCPN works perfectly since it shows all data via WiFi. So how to do next? Thanks for the response!
by PedroFed
Wed Mar 11, 2020 11:37 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: QK-A031 & Watcheye AIS receiver,ST50, Navtex connections----solved
Replies: 7
Views: 3486

Re: QK-A031 & Watcheye AIS receiver,ST50, Nav6 connections

Thanks for your support sofar. When I reversed two wires I finally got AIS on my windows 10 computer running Opencpn via the QK-031. Watcheye AIS receiver works now after reversing NMEA output wires. I can see LED2(watcheye) flashes. So now I have AIS and GPS on my windows 10 computer via USB. I fou...
by PedroFed
Wed Mar 11, 2020 10:44 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: QK-A031 & Watcheye AIS receiver,ST50, Navtex connections----solved
Replies: 7
Views: 3486

QK-A031 & Watcheye AIS receiver,ST50, Navtex connections----solved

Can you help me with the proper installation of my QK-031? I used to have a Brookhouse mux, everything worked ok until it broke down. It can’t be repaired anymore so I bought a QK-031 after consulting a friend. It doesn’t work well so far. This is the stuff I like to connect: = ST 50 Autohelm data: ...
by PedroFed
Mon Mar 02, 2020 12:39 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Alltek CAMINO-08 AIS Receiver with A031,will it work?----solved
Replies: 2
Views: 1508

Alltek CAMINO-08 AIS Receiver with A031,will it work?----solved

Hi, can you please advise me on whether my Alltek CAMINO-08 AIS Receiver will work with your A031 multiplexer. Many thanks!
by PedroFed
Mon Mar 02, 2020 10:58 am
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: ST60 works with A031--solved,also discussed ST50
Replies: 5
Views: 3406

Re: ST60 works with A031

ST50 isn't very old. Many boats are still using ST 50 Autohelm to transmit speed, wind, GPS & navdata, depth through Sealink to NMEA using A031.
by PedroFed
Tue Feb 25, 2020 1:29 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Cannot get A031 to work---solved(also discussed NASA masthead clipper issue)
Replies: 30
Views: 18991

Re: Cannot get A031 to work---solved(also discussed NASA masthead clipper issue)

We received our last order yesterday. Interested to see A031 has the new panel. On the new panel, these reserved terminals have been named as 'COM', we suspect if these are designed for RS232 protocol devices? Can Quark confirm this, please.
by PedroFed
Fri Feb 21, 2020 5:02 pm
Forum: Marine Electronics(AIS/NMEA Multiplexer)
Topic: Summary of A026 WiFi reliable troubleshooting and check points
Replies: 441
Views: 45143

Re: A024/026 WiFi unreliable issue---solved

Well, i should check this post before jumping on my boat last week.