Quark-elec Technical Forum

Thank you for your support. 4800bps and reverse polarisation (“swap the wires”) does the trick. I receive the AIS data per wireless so the low baud rate does not affect me negatively. So I have the position on my VHF and the AIS + GPS on my tablet now, I think this will suit me. Yours is a very posi...

I did not seem to get the NMEA signal to the VHF (No position, no time). Anyone here know which settings for the outgoing NMEA should be used on A027? I am trying to connect the A027 NMEA Output to the VHF IC-M411.The documentation on the NMEA input of the M411 VHF radio is very limited… I tried to ...

Thanks so much for coming back to me.The receiver is working fine now! I tracked down the problem. In order to set the system up initially without a VHF splitter, I needed to plug the VHF antenna directly into the receiver's BNC socket, for which I needed an adapter. So I went on line and bought a p...

Hello. Sorry to bother you, but I have a technical query here, regarding connecting a Quark A028 AIS receiver, via a NMEA2000 backbone, to a B&G Vulcan 7 chartplotter. - I'm setting it up at home, which overlooks the sea, with a clear view to sea and an antenna elevation of 90+ ft. - I'm taking the ...

I noticed if my iPad is locked, and is not connected to power, then wi-fi will temporarily disconnect from the wi-fi after about 20-30 seconds as a battery saving feature and this will affect my iphone connection with A027, this is very strange. Disable the battery saving mode on my iPad fixed this ...

Works perfectly, super chuffed. It was the Baud rate and cable connections.

Hello, If I use the NMEA output from the T122 and connect it to the NMEA input on the A026 should I be able to get data sent though Wi-Fi to an app like EMEAremote? Thanks

Hi Did you set your Vulcan MFD in Access point mode and connect the A027 via WiFi? Congurations!!!

Thanks. All working now.

Hi I am trying to connect my em-trak 100 to the A031 multiplexer. The em-trail provides a nmea 0183 cable.
Where do I connect the wires on the A031?