A034 NMEA-0183 and NMEA 2000 Data Translation

Quark-elec AIS receiver and NMEA multiplexer products questions
Post Reply
jimh
Posts: 2
Joined: Thu Jan 07, 2021 5:45 pm
Location: USA, Michigan
Contact:

A034 NMEA-0183 and NMEA 2000 Data Translation

Post by jimh »

Is there an article or table or chart that describes which NMEA-0183 SENTENCES can be translated to which NMEA-2000 PARAMETER GROUPS ( and vice versa) by the A034 device?

User avatar
admin
Site Admin
Posts: 637
Joined: Tue May 13, 2014 2:50 pm

Re: A034 NMEA-0183 and NMEA 2000 Data Translation

Post by admin »

Chapter 3.6 in the manual show that. https://quark-elec.com/doc/QK-A034_manual.pdf.
Thanks.

jimh
Posts: 2
Joined: Thu Jan 07, 2021 5:45 pm
Location: USA, Michigan
Contact:

Re: A034 NMEA-0183 and NMEA 2000 Data Translation

Post by jimh »

Thanks for the quick reply.

I see in Section 3.6 the list of conversions of NMEA-0183 sentences to NMEA-2000 Parameter Grops does not show sentences DSC and DSE.

The sentences DSC and DSE would typically be sent from a DSC radio.

Is the omission of DSC and DSE an error in the table?

Or are DSC and DSE omitted for a particular reason?

Is there a protocol problem or conflict that prevents the inclusion of DSC and DSE in the lexicon of translations possible?

Post Reply