A026 USB connection to PC----solved

Quark-elec AIS receiver and NMEA multiplexer products questions
Post Reply
Albinatum
Posts: 23
Joined: Sun Oct 13, 2019 5:10 pm

A026 USB connection to PC----solved

Post by Albinatum »

Received my Brand new QK-A026 and connected via USB (also power input) and wi-fi setup too, no problem.
I received today Digital Yacht USB to NMEA adaptor as per two instructions attached, in order to get USB NMEA data connection to computer and using the USB connection of device for power supply only and connect to computer just in case of any device update.
The device is connected at home with no DC power supply available only via USB.
I use this sketch for connecting the A026 but nothing comes out from my computer.
Attachments
11.png
11.png (81.17 KiB) Viewed 1381 times

Albinatum
Posts: 23
Joined: Sun Oct 13, 2019 5:10 pm

Re: A026 USB connection to PC

Post by Albinatum »

connections with A026
Attachments
22.png
22.png (114.91 KiB) Viewed 1379 times

User avatar
admin
Site Admin
Posts: 637
Joined: Tue May 13, 2014 2:50 pm

Re: A026 USB connection to PC

Post by admin »

Sorry for this confusion. Due to different protocol I believe you need swap + and - wires on the connections with A026. Check below image please. I believe it will work.
Attachments
333.jpg
333.jpg (4.11 KiB) Viewed 1378 times

Albinatum
Posts: 23
Joined: Sun Oct 13, 2019 5:10 pm

Re: A026 USB connection to PC

Post by Albinatum »

Have managed to work with your advice.
Also I'm really happy because my tablet surface Pro X with windows 10 ARM64, has recognized the usb connection of device straight away and also running wit it. Because it's a real pain the drivers for such version that must be compiled exclusively for ARM64 (windows).

Post Reply